Home / News / 2018

Do You Know How To Use And Maintain The Scraper Conveyor?

Sep. 19, 2018

The Scraper Conveyor has a flexible scraper conveyor and a corner scraper conveyor. The main structure and components of the scraper conveyor and the buried scraper conveyor are basically the same, and it consists of three parts: the head, the middle part and the tail part. Scraper conveyors and buried scraper conveyors are widely used in metallurgy, building materials, power, chemicals, cement, ports, terminals, coal, mining, grain and oil, food, feed and other industries.

Use maintenance:

(1) During the start of the operation of the Scraper Chain Conveyors, check the tightness of the scraper chain, because the connection between the chutes will reduce the spacing due to the operation. If the chain is too loose, there will be accidents such as chain, chain jump, chain break and chain drop. The inspection method is to reverse the conveyor and count the number of loose links. If there are more than two completely loose links, then Need to re-tighten the chain.

(2) The working surface should be kept straight. If the working surface is not straight, the tension of the two chains will be different, which will result in uneven wear of the chain or cause the bottom chain to be dropped, stuck or broken.

(3) The bending of the conveyor should be suitable. Do not appear “quick bend”. The bending part should be not less than the eight-section chute. When moving, pay attention to the front and rear hydraulic jacks to cooperate with each other to avoid sharp bends. Otherwise, it will cause the chute to be staggered, causing the chain to break the chain. It is necessary to pay special attention to the fact that the conveyor cannot be moved when it stops.

(4) The conveyor should be laid flat. Due to the limitation of the structure of the chute, it can only adapt to the change of 3'-5' in the vertical direction. Therefore, if the surface of the working surface is partially uneven, it should be leveled. The flat laying of the conveyor is conducive to the operation of the scraper chain and can reduce the chute. Wear and reduce power consumption.

(5) The overlap between the tail of the transition groove and the middle groove is not allowed to be excessively bent, and the wooden board is used when bending.

Scraper Conveyor

Follow Us

Copyright © Hebei Africa Machinery Co., Ltd. All Rights Reserved

Powered by   Sitemap

EVERY PROJECT PROVIDED BY AFRICA MACHINERY IS FULL OF WISDOM AND CREATIVITY
Hebei Africa Machinery Co., Ltd.
Download
To access this exclusive file, please provide your email address.
Online Sales
skype whatsapp
send us a message

By continuing to use the site you argee to the use of cookies more information.

Accept